Corrosion inhibitors, cleansers and anti-freeze

Water treatment products for central heating systems: heating system care, maintenance and protection for all indirect heating systems, including iron, steel, copper, brass and aluminium components. As soon as a heating system is completed and filled with water, deterioration of the system begins. The combination of water, air, a mixture of metals and even installation debris and contaminants can result in internal corrosion, sludge formation in low flow areas and scaling of boilers and heat exchangers. Symptoms include cold panels in radiators, blocked radiators, irritating boiler noises, a long recovery time after drawing off hot water, an inadequate water supply and failure of pumps, radiators and valves. These problems are not inevitable, and products from the SYSTEMSURE range will protect both new and old heating systems from corrosion, scaling and freezing, and cleanse and restore systems which have been previously unprotected and neglected. click on each product for more information
SYSTEMSAFE-DM	HYPER-FLUSH	SYSTEM PRE-CLEAN
Scale & corrosion inhibitor	Non-acidic power flushing liquid	Pre-commission cleaner

Powerful long-term protection for heating systems. Suitable for all metals, including aluminium.	Extra solvency and dispersion power to take corrosion deposits, sludge and scale into suspension for easy removal by power flushing or by drain down methods.	Essential for new and modified heating systems to eliminate and neutralise installation debris, corrosive flux residues, oil and grease. Conditions and prepares metal surfaces.

SYSTEM-HUSH	FREEZBREAKER-LT	SYSTEMSEAL
Solution for 'kettling' & boiler noise	Anti-freeze	Heating system leak sealer

Stops boiler noises and 'kettling' without dismantling or separate descaling. Removes baked on corrosion and light scale deposits from boilers and heat exchangers during normal operation and may be left in the system.	Low-toxicity, BS6580 specification antifreeze additive to protect heating and cooling systems down to -32°C. Compatible with SYSTEMSURE range of chemicals.	Seals leaks and weeps in difficult to reach areas. Liquid form for easy application and dispersal. Suitable for all metals.

SYSTEMSAFE-IC
Scale & corrosion inhibitor

Economical and effective liquid corrosion inhibitor for use in industrial and commercial closed water systems to prevent corrosion, sludge and scale problems.