For advice on the correct product for any application, contact
our telephone help line on 01727 875020.
COMMERCIAL POWER FLUSHING FILTER FOR HIGH PERFORMANCE POWER FLUSHING PUMPS
Power flushing is the fastest and most effective means of cleansing sludge and corrosion debris from central heating systems, utilising a high flow of water to loosen and ultimately expel the debris - usually containing large quantities of black iron oxide - from the system.
Clear water is forced through a system, pushing debris ahead of it, and this continues until the dump water finally runs clear. This may take a considerable time.
The CombiMag Twin power flushing filter has been developed from the standard CombiMag for use on commercial heating systems, in conjunction with the Clearflow CF90 or CF210 power flushing pumps. It will quickly remove circulating black iron oxide contamination from the flushing water, using the power of two rare earth magnets to extract magnetic iron oxides from the water flow.
The CombiMag Twin filter is installed in line with the power flushing pump. The cyclone construction directs contaminated water through a powerful magnetic field, such that even the smallest of particles are retained on the central magnets, from which they may be easily cleaned during and after power flushing.
Collected debris, which may otherwise lead to blockages in smaller bore pipework, is prevented from re-entering the heating system.
The rapid removal of debris from the flushing water prevents saturation of the cleaning solution with black sludge, leading to a more effective power flush.
The debris retained on the magnet is an impressive visual aid. It demonstrates to property owners the quantity of debris that has been removed from the system, confirms the need for the power flush, and demonstrates that the clean has been professionally carried out.
Time savings on every job when using the CombiMag Twin will rapidly cover its cost, reducing job time and consequent disruption.
The more effective cleansing process achieved when power flushing with a CombiMag Twin filter reduces heating costs and gives a more efficient heating system.
Click below to download the full data sheet/instructions (PDF)
Want to know how to clean your CombiMag magnet more quickly and effectively?
Next time you finish a roll of PTFE tape, keep the empty reel. Slide it up the length of your CombiMag magnet as far as it will go before you start power flushing. When you need to clean the magnet, remove it from its chamber and slide the empty PTFE reel down the magnet. It will push the black debris ahead of it and leave the magnet much cleaner than simply grasping the magnet with a disposable glove.