DESCALING CHEMICALS
SCALEBREAKER RANGE:

QUICK LINKS

NEED HELP?

For advice on the correct product for any application, contact our telephone help line on 01727 875020.

NEUTRALISING CRYSTALS

FOR NEUTRALISING ACIDIC FLUSHING CHEMICALS BEFORE DISPOSAL

Neutralising Crystals are added to the CLEARFLOW® tank after the final power flush 'dump' (when water leaving the dump hose is crystal clear) and circulated briefly to ensure neutralisation of any residues after use of Power Flush FX2.

Neutralising Crystals

Neutralising Crystals

  • INSTRUCTIONS
  • PACK SIZES
  • TECHNICAL DATA

Application & usage:

When flushing with Power Flush FX2, after purging all debris to waste, add NEUTRALISING CRYSTALS to the CLEARFLOW tank and circulate for 5 minutes before a final purge, allowing waste water to run clear. Check the waste water with pH paper.

Available in:

  • Cartons of 20 'one-shot' tubes (ANC0012)
  • Cartons of 6x2.5kg pails (ANC004)
  • 15kg pail (ANC005)

    • Technical data:

  • Usage rate: 1 to 5% in water
  • Appearance: white crystals
  • Odour: none
  • Density at 20°C: ca. 1.25 g/ml
  • pH of 10% solution: >12.5
  • Solubility in water at 20°C: 21 gm/lt
  • Max temp: n/a
  • Comments: neutralises spent descaling chemicals; 0.5% as final flush