For advice on the correct product for any application, contact
our telephone help line on 01727 875020.
COMBUSTION DEPOSIT REMOVER FOR GAS-FIRED BOILERS AND APPLIANCES
Gas is an inherently clean fuel, but combustion deposits can still be formed as a result of imperfect combustion due to an inadequate air supply, or incorrect setting up.
In domestic locations deposits often occur as a result of fluff, hair and other debris being taken in with the combustion air and carbonising on the heat exchanger surfaces.
SOOTBREAKER GS cleans domestic and commercial gas boiler heat exchangers whilst the boiler is firing, and will clean areas which cannot be reached by manual cleaning methods.
SOOTBREAKER GS is a blend of oxidising agents and catalysts in liquid form so that it may be sprayed directly onto heat exchangers, and can reach otherwise inaccessible areas.
Fire appliance for at least ten minutes, and then turn off. Spray heat exchanger surfaces with a fine mist of SOOTBREAKER GS until moist, and then re-fire appliance as soon as possible. Allow to fire for 10 minutes, and switch off. Some white vapour may be seen from the boiler flue during the reaction - this is quite normal.
Re-open the boiler and, if necessary, remove any remaining loosened deposits with a vacuum cleaner.
For domestic boiler applications, follow above procedure, but after removing casing, use an angled spray to spray up into the heat exchanger, and if possible, down from above also. Place newspaper underneath the appliance being cleaned, to catch any residues from the process.
CAUTION: THIS PRODUCT IS FOR USE ONLY BY PERSONNEL QUALIFIED TO SERVICE GAS APPLIANCES